Alcatel 5V 5060D, 5060A Secure Boot DA auth file

If you’re using the Alcatel 5V device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install the Alcatel 5V MTK Secure Boot DA file.

If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your device. The boot file or firmware file is also known as the DA file. The DA file is necessary to flash any file into a sucre boot enabled MTK device.

Advantages of Download Agent Loader Files

• Bypass Factory Reset Protection (FRP Lock) on the Alcatel 5V
• System Image backup of the Alcatel 5V X5515
• Read security codes of an MTK device
• Can flash new firmware on an Alcatel 5V
• Clone a Recovery Image or boot files

Disclaimer:

GetDroidTips won’t be responsible for any kind of damage or error that will occur on your device by following this guide or flashing any file. Proceed at your own risk.

Download Link:
   •  Alcatel 5V DA File
(File contains: mtk_allinone_da.bin)
   •  Download SP Flash Tool

Pre-requirements:

• This DA file is supported for the Alcatel 5V device only.
• You’ve to download the DA file for your Alcatel 5V device from the link above.
• A PC/Laptop and a USB cable are required.

Steps to Install Alcatel 5V MTK Secure Boot DA auth File

Method 01: Use NCK Box

• Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
• Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
• Click to select Custom Loader.
• Then head over to the DA file and select the downloaded DA file.
• Click on Flash Mode.
• Next, open NCK Loader > Click on Settings.
• Head over to the DA file and select the downloaded DA file.
• Go back to the Service tab > Click on Reset.0
• Y0ur Alcatel 5V will now reboot with reset FRP lock system

For a complete step by step guide on how to install DA file using NCK Pro Box

Method 02: Use SP Flash Tool

• Launch the SP Flash Tool on your PC.
• Click on the Download tab.
• Click on the Choose option and select the downloaded DA file.
• The DA file will load automatically and install it.

For a complete step by step guide on how to install the DA file using SP Flash tool

Method 03: Use Miracle Box

For a complete step by step guide on how to install the DA file using Miracle Box

That’s it, guys. We hope you’ve successfully installed the DA file on your Alcatel 5V X5515 device. For any queries, feel free to ask in the comments below.